Server Operations
In This Section
Powering Up the
Server................................................................................................................21
Powering Down the
Unlocking the Tower
Removing the Access Panel
Powering Up the Server
To power up the server, press the Power On/Standby button.
Powering Down the Server
1. Shut down the OS as directed by the OS documentation.
2. Press the Power On/Standby button to place the server in standby mode.
3. Disconnect the power cords.
The system is now without power.
Server...........................................................................................................21
Bezel..........................................................................................................22
.........................................................................................................22
WARNING: To reduce the risk of personal injury, electric
shock, or damage to the equipment, remove the power cord to
remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the
power supply and some internal circuitry remain active until AC
power is removed.
IMPORTANT: If installing a hot-plug device, it is not necessary to
power down the server.
When the server enters standby power mode, the system power LED changes
to amber.
21