Installing The Operating System; Registering The Server - HP ML310 - ProLiant - G2 User Manual
Generation 2 server
Hide thumbs
Also See for ML310 - ProLiant - G2:
- Setup and installation manual (170 pages) ,
- User manual (123 pages) ,
- Maintenance and service manual (90 pages)
Table of Contents
Advertisement
36
HP ProLiant ML310 Generation 2 Server User Guide
Installing the Operating System
To operate properly, the server must have a supported operating system. For the
latest information on supported operating systems, refer to the HP website
(http://www.hp.com/go/supportos).
Two methods are available to install an operating system on the server:
Follow the on-screen instructions to begin the installation process.
For information on using these installation paths, refer to the SmartStart
installation poster in the HP ProLiant Essentials Foundation Pack, included with
the server.
Registering the Server
To register a server, refer to the registration card in the HP ProLiant Essentials
Foundation Pack or the HP Registration website (http://register.hp.com).
SmartStart assisted installation—Insert the SmartStart CD into the CD-ROM
drive and reboot the server.
Manual installation—Insert the operating system CD into the CD-ROM drive
and reboot the server. This process may require you to obtain additional
drivers from the HP website (http://www.hp.com/support).
Advertisement
Table of Contents
