Viewing Bandwidth Settings - 3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual

178 C 13: C
HAPTER ONFIGURING
Viewing Bandwidth
Settings
Q S
UALITY OF ERVICE
2 Define the trust mode.
3 Click
The Bandwidth Summary Page displays bandwidth settings for each
interface.
To view Bandwidth Settings:
1 Click Device > QoS > Bandwidth > Summary. The Bandwidth
Summary Page opens:
Figure 95 Bandwidth Summary Page
The Bandwidth Summary Page contains the following fields:
Interface — Displays the interface for which rate limit and shaping
■
parameters are defined.
Ingress Rate Limit
Status — Indicates the ingress rate limiting status on the interface.
■
The possible field values are:
Enabled — Ingress rate limiting is enabled on the interface.
■
No Limit — Ingress rate limiting is disabled on the interface. This is
■
the default.
Rate Limit — Indicates the ingress traffic limit for the interface. The
■
field options include 128, 1024, 5056, 10048, 50048, 100032 and
500032 kbits per second.
. The selected Trust mode is enabled on the device.