Speed — Displays the configured rate for the port. The port type
■
determines what speed setting options are available. The possible field
values are:
10 — Indicates the port is currently operating at 10 Mbps.
■
100 — Indicates the port is currently operating at 100 Mbps.
■
1000 — Indicates the port is currently operating at 1000 Mbps.
■
Auto — Used to automatically configure the port.
■
PVID — VLAN ID assigned to untagged frames received on this port.
■
Link Type — Displays the VLAN membership mode for a port. The
■
possible field values are:
Access — The port transmits and receives untagged frames only.
■
Hybrid — The port may transmit tagged or untagged frames.
■
Trunk — The port is an end-point for a VLAN trunk. A VLAN trunk
■
is a direct link between two switches, so the port transmits tagged
frames that identify the source VLAN.
Duplex — Displays the port duplex mode. This field is configurable
■
only when the port speed is set to 10M or 100M. This field cannot be
configured on LAGs. The possible field values are:
Full — The interface supports transmission between the device and
■
its link partner in both directions simultaneously.
Half — The interface supports transmission between the device
■
and the client in only one direction at a time.
Auto — Use to automatically configure the port.
■
119