Displaying The Web Server Certificate - 3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual

76 C 4: M
HAPTER ANAGING
Displaying the Web
Server Certificate
D S
EVICE ECURITY
Disabled — HTTPS is disabled on the device.
■
Change HTTPS Port Number — Specifies the TCP port to be used for
■
HTTPS. The default value is 443, and the range is 1-65535.
You cannot configure the HTTP and HTTPS servers to use the same port.
If you change the HTTPS port number, clients attempting to connect to
the HTTPS server must specify the port number in the URL in this format:
https://device:port_number
2 Define the fields.
3 Click . The HTTPS settings are updated.
The HTTPS Detail Page allows users to display detailed information about
the web server certificate.
To view information about the digital certificate:
1 Click Security > HTTPS Settings > Detail. The HTTPS Detail Page opens:
Figure 38 HTTPS Detail Page
The HTTPS Detail Page contains the following fields:
Issued to — Shows the registered user of this certificate.
■
Issued by — Shows the certification authority that issued this
■
certificate.
Valid from/until — Shows the validity period for this certificate.
■
SHA1 Fingerprint — Hash sting used to encrypt communications.
■
MD5 Fingerprint — Hash sting used to encrypt communications.
■