Panasonic Toughbook CF-19KDRAXCM Service Manual page 56

n Putting of the Palm Rest ASSY
3~5mm
Windows Logo Label
6~8mm
Remove the Release Paper, and then attach the Palmrest Ass'y.
Remove the two-sided tape on the back side and attach it.
After attaching, press by the load 30 to 40N (3.0 to 4.0 Kgf).
Remove the Release Paper.
n Putting of the KBD Tape
0 ~ 2 mm from the
0 ~ 2 mm from
notch bottom edge
the protrusion
0 ~ 2 mm from the
notch bottom edge
0 ~ 2 mm from
the KBD edge
Intel Label
Energy Star Label
Palmrest Ass'y
Keyboard
Ensure the direction is right.
KBD Tape
KBD Tape
5~7mm
6~8mm
4~6mm
KBD Tape
KBD Tape
9-33
Set the five Hooks.
0 ~ 2 mm from
the protrusion
0 ~ 2 mm from
the protrusion
0 ~ 2 mm from
the protrusion
0 ~ 2 mm from the
notch bottom edge