Panasonic Toughbook CF-19KDRAXCM Service Manual page 42

n Assembly of Display Unit
Note
Avoid much stress on the Cable.
Details of "A"
Black / White Blue / Glay
LCD Unit
Set to the Top Case Ass'y Set to the Top Case Ass'y Set to the Top Case Ass'y
A
9.2.7. Setting the Pad PCB and SW PCB
1. Attach both the SW PCB and the Operation Sheet to the
Cabinet.
2. Connect the 3 Cables to the 3 Connectors.
(CN800,CN805,CN807)
3. Fix the Pad PCB using the 4 Screws. <N1>
Note:
Tighten the Screws in the numbered order (No1 to
No4).
Screws <N1> : DFHE5025XA
Pass the Cable through
the groove of cushion
Caution: Running over
affects waterproof perf-
ormance.
Green
Insert all of antenna cables into
the notch of the board.
LCD Cable
Insert position
Torque of tightening screw :1.5 0.15N m( 15.0 1.5kgf cm)
<Order of fixing screws>
Screw
Close the LCD with the
Hinge hooked on the
Top Case, and then
fold back.
SW PCB
Operation Sheet
<N1>:No.3
Pad PCB
9-19
Screw Screw Screw
<N1>:No.2
<N1>:No.1
Connector(CN807)
<N1>:No.4
Connector(CN805)