Panasonic Toughbook CF-19KDRAXCM Service Manual page 29

12. Remove the 2 Screws <N19>, and remove the Wireless
Module.
13. Remove the 2 Screws <N19>, and remove the Modem
PCB.
14. Remove the 2 Screws <N19>, and remove the DIMM
Holder.
Tape
<N19>
<N19>
Connector(CN23)
15. Remove the Tape.
16. Disconnect the 3 Cables from the 3 Connectors.
(CN9,CN14,CN23)
17. Remove the 7 Screws <N19>, and remove the Main PCB
and Combo Socket.
Screws <N3> : DFHE5108ZA
Screws <N8> : DRSB2+10FKL
Screws <N9> : DRSB2+5FKL
Screws <N19> : XSB2+3FNL
<N19>
<N19>
Connector(CN9)
Connector(CN14)
<N19>
Main PCB
Combo Socket
9.1.11. Removing the I/O PCB Ass'y
I/O PCB Ass'y
1. Remove the 4 D-SUB Screws <N2>.
2. Remove the 2 Screws <N9>.
3. Remove the I/O PCB Ass'y.
Screws <N2> : DFHE5058ZB
Screws <N9> : DRSB2+5FKL
9.1.12. Removing the Power SW PCB
<N1>
Connector(CN9)
Power SW
PCB
1. Remove the Screw <N1>.
2. Disconnect the Cable from the Connector (CN9).
3. Remove the Power SW PCB.
Screw <N1> : DFHE5025XA
9-6
<N9>
<N9>
<N2>
<N2>
<N2>
<N2>