Panasonic Toughbook CF-19KDRAXCM Service Manual page 36

n Assembly of Digitizer (Applicable Model : Digitizer Model)
DIGITIZER ASSY
0~1mm 0~1mm 1~2mm
1~2mm
0~1mm
Cushion
Sheet
Digitizer
0~1mm
0~1mm
Sheet
Remove the maker attaching sheet
(white, variant type) and attach Sheet.
9.2.3. Assembling the WWAN Main Antenna PCB, LAN-Main BT Antenna PCB, LAN AUX
Antenna PCB, WWAN AUX Antenna PCB and Pen holder
1. Fix the Pen Holder using the 2 Screws. <K10-1-13>
2. Attach the Pen.
3. Fix the WWAN AUX Antenna PCB using the 2 Screws.
<N1>
4. Fix the LAN AUX Antenna PCB using the 2 Screws. <N1>
5. Fix the LAN-Main BT Antenna PCB using the 2 Screws.
<N1>
6. Fix the WWAN Main Antenna PCB using the 2 Screws.
<N1>
Screws <N1> : DFHE5025XA
Screws <K10-1-13> : DRHM5025YAT
*Paste Sheets firmly. 20~30N(2.0~3.0Kgf)
Match to the end of LCD Frame
to attach (0 - 0.5 mm).
* Avoid coming over inside
(reflection sheet inside).
Adhesive Tape
0~1mm
DG Side
Cushion
DIGITIZER ASSY
Detail of "A"
0~0.5mm
Avoid running over the rib.
Remove the Release
Paper and attach it.
A
Pen
WLAN-Main
BT Antenna
PCB
WWAN Main
Antenna PCB
<N1>
9-13
Match to the end of LCD Frame
to attach (0 - 0.5 mm).
* Avoid coming over inside
(reflection sheet inside).
Adhesive Tape
DG Side
Detail of "B"
B
0~0.5mm
Avoid running over the rib.
<K10-1-13>
<K10-1-13>
<N1>
Pen Holder
<N1>
WLAN Aux
Antenna PCB
<N1>
<N1>
WWAN Aux
Antenna PCB
<N1>