Panasonic Toughbook CF-19KDRAXCM Service Manual page 49

Ensure that both top and
bottom are hooked.
Slide the whole
BAT FPC ASSY.
Torque of tightening screw :0.2 ± 0.02N·m( 2.0 ± 0.2kgf·cm)
9.2.12. Setting the Audio PCB
1. Connect the Cable to the Connector. (CN901)
2. Fix the Audio PCB using the 3 Screws. <N9>
Note:
Tighten the Screws in the numbered order (No1 to No3).
Screws <N9> : DRSB2+5FKL
Screw
BAT FPC Ass'y
Screw
9-26
0~0.5mm
EX
PC
0~0.5mm
Gasket
Attach to the
DIMM socket.
0~1mm
Side surface
SD Blind
Sheet Base
Insert the FPC as Insert the FPC as Insert the FPC as
illustrated, and lock it. illustrated, and lock it. illustrated, and lock it.
<N9>:No1
<N9>:No.2
Audio PCB
0~0.5mm
Attach it fitting to the left. 0~0.5mm
D Blind
Sheet S
Apply the load to attach.
20~30N (2.0~3.0Kgf)
<N9>:No.3
Connector(CN901)