Adobe 65011817 - Fireworks CS4 - Mac Using Manual page 66

USING FIREWORKS CS4
Working with bitmaps
Replace colors in bitmap objects
Original photograph; after using the Replace Color tool
Replace a color by using the color swatch
In the Bitmap section of the Tools panel, select the Replace Color tool
1
Rubber Stamp tool until a pop-up menu appears.)
2 In the From box in the Property inspector, click Swatch.
Click the From color box to select the color probe, and select a color from the pop-up menu to specify the color you
3
want to replace.
Click the To color box in the Property inspector and select a color from the pop-up menu.
4
Set the other stroke attributes in the Property inspector:
5
Determines the range of colors to replace (0 replaces only the From color; 100 replaces all colors similar
Tolerance
to the From color).
Determines how much of the From color is replaced.
Strength
Replaces the From color with the To color. Deselect Colorize to tint the From color with the To color,
Colorize
leaving some of the From color intact.
Drag the tool over the color you want to replace.
6
Replace a color with a selected color in an image
In the Bitmap section of the Tools panel, select the Replace Color tool
1
Rubber Stamp tool until a pop-up menu appears.)
2 In the From box in the Property inspector, click Image.
3 Click the To color box in the Property inspector to select the color probe, and then select a color from the pop-up menu.
Set the other stroke attributes in the Property inspector.
4
Using the tool, click down on a section of the bitmap image that contains the color you want to replace. Without
5
lifting the tool, continue to brush across the image with it.
Last updated 3/8/2011
. (If the tool isn't visible, hold down the
. (If the tool isn't visible, hold down the
60