Table of Contents
Advertisement
4.4.2
LAN Cable Status
Advanced
POST Check LAN cable
LAN Cable Status
Pair
Status
1-2
N/A
3-6
N/A
4-5
N/A
7-8
N/A
1-2
N/A
3-6
N/A
4-5
N/A
7-8
N/A
POST Check LAN Cable [Disabled]
Enables or disables checking of the LAN cable during the Power-On Self-Test
(POST). Configuration options: [Disabled] [Enabled]
4.4.3
USB Configuration
The items in this menu allows you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
USB Configuration
Module Version - 2.24.0-11.4
USB Devices Enabled:
Legacy USB Support
Port 64/60 Emulation
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows None.
Legacy USB Support [Auto]
Allows you to enable or disable support for USB devices on legacy operating
systems (OS). Setting to Auto allows the system to detect the presence of USB
devices at startup. If detected, the USB controller legacy mode is enabled. If no
USB device is detected, the legacy USB support is disabled. Configuration options:
[Disabled] [Enabled] [Auto]
4-20
Length
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
None
BIOS SETUP UTILITY
[Disabled]
[Auto]
[Disabled]
[HiSpeed]
[Enabled]
Check LAN cable during
POST.
Select Screen
Select Item
+-
Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 2: BIOS setup
Advertisement
Table of Contents
