Table of Contents
Advertisement
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphic Mode Select [Enabled, 8MB]
Allows you to select the amount of system memory used by the Internal graphics
device. Configuration options: [Disabled] [Enabled,1MB] [Enabled, 8MB]
PEG Link Mode [Auto]
Sets the PCI Express graphics link mode. Setting this item to [Auto] allows the
motherboard to automatically adjust the PCI Express graphics link mode to the
correct frequency based on the system configuration. Four additional settings are
available for overclocking the PEG Link Mode. Configuration options: [Auto] [Slow]
[Normal] [Fast] [Faster]
Sorth Bridge Configuration
Sorth Bridge chipset Configuration
PCIEx16_2 Force
PCIEx16_2 Force [Auto]
Allows you to manually adjust PCI-E x 16_2 configuration.
Configuration options: [Auto] [x2 Mode (compatible)] [x4 Mode (fast)]
If you set PCIEx16_2 to x4 mode, the PCIEx1_1 will be disabled.
4-24
[Auto]
Chapter 2: BIOS setup
Advertisement
Table of Contents
