Table of Contents
Advertisement
4.
JMicron JMB363
This connector is for a Serial ATA signal cable. This connector supports
a Serial ATA hard disk drive that you can configure for RAID through the
onboard Serial ATA RAID controller.
The JMicron SATA controller mode item in the BIOS is set to [IDE] by default.
Set the item to [RAID] if you want to build a RAID set. See section "4.4.6
Onboard Device Configuration" for details.
P5B-V SATA RAID Connector
Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cables and installed Serial ATA hard disk
drives; otherwise, you cannot enter the JMicron
BIOS setup during POST.
5.
Optical drive audio connector (4-pin CD)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
P5B-V Internal Audio Connector
ASUS P5B-V
Serial ATA RAID connector (7-pin SATA_RAID [black] )
®
SATA_RAID1
CD
(black)
JMB363 RAID utility and SATA
®
2-27
Advertisement
Table of Contents
