Table of Contents
Advertisement
PEG Link Mode
This feature enhances your PCI Express graphics card performance. It allows the
motherboard to automatically adjust the PCI Express graphics link mode to the
correct frequency based on the system configuration. Four additional settings are
available for overclocking the PEG Link Mode.
Precision Tweaker
This feature allows you to fine tune the CPU/memory voltage and gradually
increase the memory Front Side Bus (FSB) and PCI Express frequency at 1MHz
increment to achieve maximum system performance.
AI NET2
AI NET2 is a BIOS-based diagnostic tool that detects and reports Ethernet cable
faults and shorts. With this utility, you can easily monitor the condition of the
Ethernet cable connected to the LAN (RJ-45) port. During the bootup process, AI
NET2 immediately diagnoses the LAN cable and reports shorts and faults up to
100 meters at 1 meter accuracy. See pages 4-23 and 5-10 for details.
C.P.R. (CPU Parameter Recall)
The C.P.R. feature of the motherboard BIOS allows automatic re-setting to the
BIOS default settings in case the system hangs due to overclocking. When the
system hangs due to overclocking, C.P.R. eliminates the need to open the system
chassis and clear the RTC data. Simply shut down and reboot the system, and the
BIOS automatically restores the CPU default setting for each parameter.
Due to chipset behavior, AC power off is required prior using C.P.R. function.
1-6
Chapter 1: Product introduction
Advertisement
Table of Contents
