Lan Cable Status - Asus P5WDG2 WS Professional User Manual

The following items appear if the NOS Mode item is set to [Manual]
Sensitivity [Sensitive]
Allows you to choose the sensitivity of the AI NOS sensor. Setting this
item to [Sensitive] will trigger AI NOS with less CPU loading. Configuration
options: [Normal] [Sensitive] [Less-Sensitive]
Target Frequency [Overclock XX%]
Allows you to set the maximum overclock percentage for the selected NOS
Mode. Configuration options: [Overclock 3%] [Overclock 5%] [Overclock
7%] [Overclock 10%] [Overclock 15%] [Overclock 20%] [Overclock 30%]
Selecting a very high frequency may cause the system to become
unstable. If this happens, revert to the default setting.
4.4.2

LAN Cable Status

This menu displays the status of the Local Area Network (LAN) cable
connected to the LAN (RJ-45) port.
POST Check LAN Cable
LAN Cable Status
Pair Status
1-2 N/A
3-6 N/A
4-5 N/A
7-8 N/A
1-2 N/A
3-6 N/A
4-5 N/A
7-8 N/A
POST Check LAN Cable [Disabled]
Allows you to enable or disable LAN cable check during POST. When
enabled, the menu reports the cable faults or shorts, and displays the point
(length) where the fault or short is detected.
Configuration options: [Disabled] [Enabled]
This function is available only on Marvell LAN (LAN2).
ASUS P5WDG2 WS Professional/P5WDG2 WS PRO/WiFi-AP
[Disabled]
Length
Check LAN cable
during POST.
4-23