Reproduction Ratio - Ricoh Aficio MP 6000 Operating Instructions Manual

❖ Reproduction Ratio

Item
Shortcut R / E
R / E Ratio
R / E Ratio Priority
Ratio for Create Margin
❖ Edit
Item
Front Margin: Left / Right You can specify left and right margins on the front side of copies in
Back Margin: Left / Right You can specify left and right margins on the back side of copies in
Front Margin: Top / Bottom You can specify top and bottom margins on the front side of copies
Back Margin: Top / Bottom You can specify top and bottom margins on the back side of copies
1 Sided→2 Sided Auto
Margin: TtoT
1 Sided→2 Sided Auto
Margin: TtoB
Erase Border Width
Erase Original Shadow in
Combine
Erase Center Width
Front Cover Copy in
Combine
Copy Order in Combine
Orientation: Booklet,
Magazine
Copy on Designating
Page in Combine
Image Repeat Separation
Line
Double Copies Separation
Line
6
You can register up to three frequently used Reduce/Enlarge ra-
tios other than the fixed Reduce/Enlarge ratio and have them
shown on the initial display.
You can specify the enlargement and reduction ratios that appear
if [Reduce / Enlarge] is pressed on the copier screen.
You can set the ratio with priority when [Reduce / Enlarge] is
pressed.
You can set a Reduce/Enlarge ratio when registering Create Mar-
gin in a shortcut key.
Margin Adjustment mode.
Margin Adjustment mode.
in Margin Adjustment mode.
in Margin Adjustment mode.
In 1 sided to 2 sided Duplex mode, you can specify the margins on
the back side. The margin is set to the same value of "Back Margin:
Left / Right".
In 1 sided to 2 sided Duplex mode, you can specify the margins on
the back side. The value set for "Back Margin: Top / Bottom" is
used.
You can specify the width of the erased border margins with this
function.
In Combine mode, you can specify whether to erase a 3 mm, 0.1"
boundary margin around all four edges of each original.
You can specify the width of the erased center margins with this
function.
You can make a combined copy on the front cover sheet when you
select the Front Cover mode.
You can set the copy order in Combine mode to Left to Right or
Top to Bottom.
You can select the orientation of copies to open when using Booklet
or Magazine mode.
You can specify whether to make a combined copy on the inserted
slip sheets in Desig./Chapter mode.
You can select a separation line using the Image Repeat function
from: None, Solid, Broken A, Broken B, or Crop Marks.
You can select a separation line using the Double Copies function
from: None, Solid, Broken A, Broken B, or Crop Marks.
Description
Description