Changing The Stamp Position; Specifying The First Printing Page And Start Number ("P1,P2 - Ricoh Aficio MP 6000 Operating Instructions Manual

Changing the stamp position

Changes the stamp position.
A
Press [Change] under Stamp Position.
B
Select the desired position, and then press [OK].
C
After you specify all desired settings, press [OK].
D
Place the originals, and then press the {Start} key.
Specifying the first printing page and start number ("P1,P2...", "-1-,-2-...", "P.1,P.2...",
"1,2...")
The following explains the example when "P1, P2 ..." is selected. The steps are
the same for other cases.
A
Press [Change] under Change Numbering.
B
Press [First Printing Page], enter the original sheet number from which to start
printing, and then press the {q} key.
Copier Functions
2
117