Configuring S/Pdif Out - Gigabyte GA-780T-D3L User Manual

5-2-2 Configuring S/PDIF Out

The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio
quality.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF coaxial cable to the corresponding S/PDIF out connector as shown below and an external
decoder for transmitting the S/PDIF digital audio signals.
2. Configuring S/PDIF Out:
On the Digital Output(RCA) screen
depth. Click OK to complete.
Enter the Digital Output(RCA) screen to configure further settings if you use the S/PDIF Out connector
(Note)
on the back panel for digital audio output or enter the Digital Output screen if you use the internal S/
PDIF Out connector (SPDIF_O) for digital audio output.
Appendix
Connects to a S/PDIF coaxial cable
, click the Default Format tab and then select the sample rate and bit
(Note)
- 82 -