Configuring S/Pdif Out - Gigabyte GA-F2A85XN-WIFI User Manual

6-1-2 Configuring S/PDIF Out
The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF optical cable to the corresponding S/PDIF out connector as shown below and an
external decoder for transmitting the S/PDIF digital audio signals.
2. Configuring S/PDIF Out:
On the Digital Output(Optical) screen
bit depth. Click OK to complete.
Enter the Digital Output(Optical) screen to configure further settings if you use the S/PDIF Out
(Note)
connector(s) on the back panel for digital audio output or enter the Digital Output screen if you use
the internal S/PDIF Out connector (SPDIF_O) for digital audio output.
, click the Default Format tab and then select the sample rate and
(Note)
- 91 -
Connects to a S/PDIF optical cable
Appendix