Gigabyte GA-780T-D3L User Manual page 74

Delete an Array
The Delete Array menu option allows for deletion of disk array assignments.
Deleting an existing disk array could result in loss of data. Record all array information including the
array type, the disk members, and stripe block size in case you wish to undo a deletion.
1. To delete an array, press <3> in the
wish to delete and press the <Delete> key or the <Alt>+<D> keys.
2. The View LD Definition Menu will appear (as shown in Figure 9) showing which drives are assigned to this
array. Press <Ctrl>+<Y> if you are sure to delete the array or other keys to abort.
3. When the array is deleted, the screen will return to
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
LD No RAID Mode
LD 1 RAID 0
Stripe Block: 64KB
Channel:ID Drive Model
1:Mas WDC WD800JD-22LSA0
2:Mas WDC WD800JD-22LSA0
Appendix
Main Menu to enter the Delete LD Menu. Then highlight the array you
Delete LD Menu. Press <Esc>to return to Main Menu.
[ View LD Definition Menu ]
Total Drv Capacity (GB)
2 157.99
Cache Mode:
[ Drives Assignments ]
Capabilities
SATA 3G
SATA 3G
Press Ctrl-Y to delete the data in the disk!
or press any other key to abort...
[ Keys Available ]
[ Keys Available ]
Figure 9
- 74 -
Status
Functional
WriteThru
Capacity (GB)
79.89
80.02