Gigabyte GA-780T-D3L User Manual page 38

CPU core 1, 2/3/4/5
& (Note)
Enables or disables CPU Core 1/2/3/4/5. (Default: Enabled)
Hard Disk Boot Priority
&
Specifies the sequence of loading the operating system from the installed hard drives. Use the up or down
arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or
<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.
EFI CD/DVD Boot Option
&
Set this item to EFI if you want to install the operating system to a hard drive larger than 2.2 TB. Make sure
the operating system to be installed supports booting from a GPT partition, such as Windows 7 64-bit and
Windows Server 2003 64-bit. Auto lets the BIOS automatically configure this setting depending on the
hard drive you install. (Default: Auto)
First/Second/Third Boot Device
&
Specifies the boot order from the available devices. Use the up or down arrow key to select a device and
press <Enter> to accept. Options are: LS120, Hard Disk, CDROM, USB-FDD, USB-ZIP, USB-CDROM,
USB-HDD, Legacy LAN, Disabled.
Password Check
&
Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup.
After configuring this item, set the password(s) under the Set Supervisor/User Password item in the BIOS
Main Menu.
Setup A password is only required for entering the BIOS Setup program. (Default)

System A password is required for booting the system and for entering the BIOS Setup

program.
HDD S.M.A.R.T. Capability
&
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard
drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings
when a third party hardware monitor utility is installed. (Default: Disabled)
Away Mode
&
Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode allows the
system to silently perform unattended tasks while in a low-power mode that appears off.
(Default: Disabled)
Full Screen LOGO Show
&
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays
normal POST message. (Default: Enabled)
Backup BIOS Image to HDD
&
Allows the system to copy the BIOS image file to the hard drive. If the system BIOS is corrupted, it will be
recovered from this image file. (Default: Disabled)
Init Display First
&
Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express
graphics card.
PCI Slot Sets the PCI graphics card as the first display. (Default)

PEG Sets the PCI Express graphics card on the PCIEX16 slot as the first display.

(Note) This item appears only when you install a CPU that supports this feature.
BIOS Setup - 38 -