Mac Clone - TP-Link TD-W8980 User Manual

N600 wireless dual band gigabit adsl2+ modem router
Hide thumbs Also See for TD-W8980:
Table of Contents

Advertisement

TD-W8980
the amount of time, in hours, then the user will be "leased" this dynamic IPv6 address.
After the dynamic IPv6 address has expired, the user will be automatically assigned a
new dynamic IPv6 address. The default is 86400 seconds.
Site Prefix Configuration Type: Select a type to assign prefix to IPv6 addresses. Delegated
and Static are provided.
1)
If Delegated is selected, please complete the following parameters.
Prefix Delegated WAN Connection: Select a WAN connection form the drop-down list
to assign prefix.
2)
If Static is selected, please complete the following parameters.
Site Prefix: Enter a value for the site prefix.
Site Prefix Length: Enter a value for the site prefix length.
Click the Save button to save the settings.

4.5.5 MAC Clone

Choose menu "Network" "MAC Clone", you can configure the MAC address of the WAN
Interface as shown below.
The WAN Interface List displays the Lay2 Interfaces you have configured on the section
WAN Settings
and its default MAC Address. You can select corresponding WAN Interface from the
drop-down list and click Clone MAC To button to clone your current PC MAC, and then click
Save.
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-18
Figure 4-16
Figure 4-17
34
4.5.1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents