Print Server - TP-Link TD-W8980 User Manual

TD-W8980
Server Name: The name of this Media Server.
To add a new share folder for your media server, please follow the instructions below:
a) Click Add New Folder button, and you will see the screen as shown in Figure 4-56.
b) Enter the name of the share folder in Share Name field.
c) Click the Apply button to apply the configuration.
b) Click the Scan now to scan all the share folders immediately. You can also select the
Auto-scan, at same time, select an auto scan interval time by drop-down list. In this case,
the media server will auto scan the share folders.
Note:
The max share folders number is 6. If you want share a new folder when the numbers has been
reached to be 6, you can delete a share folder and then add a new one.

4.10.6 Print Server

Choose menu "USB Settings"→"Print Server", you can configure print server on this page as
shown below.
There are three states of the print server, they are as follows:
Online: Indicates the print service has been turned on, and no user is using the print
services at present. You can click the "Stop" button to stop the print service.
Offline: Indicates the print service feature is disabled. You can click "Start" button to start
the print service.
Busy: Indicates the print service has been turned on, but at this moment other users are
using print services.
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-56
Figure 4-57
70