Wireless Security - TP-Link TD-W8980 User Manual

TD-W8980
III. Enter the modem router's PIN on your client device
Use this method if your client device asks for the modem router's PIN number.
Step 1: On the client device, enter the PIN number listed on the modem router's Wi-Fi Protected
Setup screen. (It is also labeled on the bottom of the modem router.)
Step 2: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup
process.
Step 3: When the WPS LED is on, the client device has successfully connected to the modem
router.
Step 4: Refer back to your client device or its documentation for further instructions.
Note:
1) The WPS LED on the modem router will light green for five minutes if the device has been
successfully added to the network.
2) The WPS function cannot be configured if the Wireless Function of the modem router is
disabled. Please make sure the Wireless Function is enabled before configuring the WPS.

4.9.3 Wireless Security

Choose menu "Wireless 5GHz" " Wireless Security", you can configure the security settings of
your wireless network.
There are three wireless security modes supported by the modem router: WPA/WPA2 – Personal,
WPA/WPA2 – Enterprise, WEP (Wired Equivalent Privacy).
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-44
58