TP-Link TD-W8980 User Manual page 101

TD-W8980
Enable Bandwidth Control: Check this box so that the Bandwidth Control settings can take
effect.
Line Type: Select the right type for you network connection. If you don't know how to choose,
please ask your ISP for the information.
Total Upstream Bandwidth - The upload speed through the WAN port
Total Downstream Bandwidth - The download speed through the WAN port.
Description: This is the information about the rules such as address range.
Priority:
Upstream bandwidth: This field displays the max and mix upload bandwidth through the
WAN port, the default is 0.
Downstream bandwidth: This field displays the max and mix download bandwidth through
the WAN port, the default is 0.
Status: The status of this rule either Enabled or Disabled.
Edit: Click Edit to modify the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1. Click Add New shown in Figure 4-92, you will see a new screen shown in Figure 4-93.
2. Enter the information as the screen shown below.
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-92
Figure 4-93
92
.