Advertisement
Troubleshooting
T1. How do I restore my Modem Router's configuration to its factory default
settings?
With the Modem Router powered
on, use a pin to press and hold the
RESET button on the back panel
for
8
to
10
seconds
releasing it.
Press it for 8 to 10 seconds
Once the Modem Router is reset, the current configuration settings will be
Note
lost and you will need to re-configure the router.
T2. What can I do if I don't know or forget my password?
1)
Restore the Modem Router's configuration to its factory default settings. If
you don't know how to do that, please refer to T1.
2)
Use the default user name and password: admin, admin.
3)
Try to configure your Modem Router once again by following the instructions
in the previous steps of the QIG.
T3. What can I do if I cannot access the web-based configuration page?
1) Configure your computer's IP Address.
before
7
Advertisement
