300mbps wireless n usb vdsl/adsl modem (120 pages)
Summary of Contents for TP-Link TD-8616
Page 1
Turn off all of your network devices, including your computer and the Modem. Connect your computer to the Port labeled “LAN” on the Modem with an Ethernet cable. Connect the splitter to the wall j ack using a telephone line, then use the other telephone line to directly connect it to the ADSL port on the Modem and...
Page 2
Plug the provided Power Adapte r into the Power jack on the back o f the Modem and the other end to a standard electrical wall socket. If no telephone is needed, please connect the ADSL port of the Modem to the Note wall jack using the telephone line directly.
Page 3
To connect to the Internet, please run the dialing software such as WinPoet Note or EnterNet to do the virtual dialing as the following described. For Windows XP OS Click the “Start All Programs Accessories Communications New connection wizard” to launch the wizard.
Page 4
Select the “connect to the Internet” Click Next Select the “set up my connection manually” Click Next Select the “connect using a broadband connection that requires user name and password” Click Next...
Page 5
Type an ISP Name to identify your connection Click Next Enter the User name and Password given by your ISP Click Next If you did not get the User name or Password, please contact your ISP fo r Note this information. Add a shortcut to this connection to my desktop for convenience...
Page 6
A fter you have successfuly created the connection, the shortcut icon this connection will appear on you r desktop. When you want to access the Internet, double-click the icon load the following screen. Click Connect The User name and Password displayed here are given by your ISP, Note which you have entered during the New Connection Wizard.
Page 7
Double-click Network and Sharing Center Click Set up a connection or network Click Connect to the Internet Click Next...
Page 8
Click Broadband (PPPoE) Enter the User name and Password given by your ISP Type a Connection name to identify your connection Click Connect Click Connect The User name and Password displayed here are given by your ISP, Note which you have entered on last step.
Page 9
Click Close to finish the setup To connect to the Internet next time, click the Start button; click Connect to, Note and then click the connection you just created. For Windows 7 OS Click the “Start Control Panel”...
Page 10
Click Network and Sharing Center Click Set up a connection or network Click Connect to the Internet Click Next...
Page 11
Click Broadband (PPPoE) Enter the User name and Password given by your ISP Type a Connection name to identify your connection Click Connect Click Connect The User name and Password displayed here are given by your ISP, Note which you have entered on last step.
Page 12
The basic settings for your Modem are completed. Please open the web browser and log on to the following websites: http://www.tp-link.com http://www.google.com If the above websites can be accessed, it indicates that your Modem has been configured successfully and you can start to enjoy the Internet. If the websites cannot be accessed, please refer to “T3.
Page 13
T1. How do I restore my Modem’s configuration to its factory default settings? With the Modem powered on, press and hold the RESET button on the rear panel for 5 seconds before releasing it. Hold it for 5 seconds Once the Modem is reset, the current configuration settings will be lost and Note you will need to re-enter all the parameters.
Service time: From 10:00 to 18:00 Indonesia (Moscow time) Tel: (+62 ) 021 6259 135 *Except weekends and holidays in E-mail : support.id@tp-link.com Russian Federation Service time : Monday to Friday 9:00 -12:00; 13:00 -18:00 Germany / Austria *Except public holidays...