Advertisement
splitter to the ADSL port on the Modem Router, also have the PHONE port
on the splitter connected to a telephone.
Connect your telephone to the port labeled "PHONE 1~2" on the Modem
Router with a telephone line.
Connect your USB device to the USB port labeled "USB" on the Modem
Router.
1. If you want to share files or use the USB Voice Mail function, please plug
Note
an external USB hard drive/USB flash disk into the USB port. To use the
printer function, please connect a USB printer to the USB port.
2. To use USB Voice Mail function, please make sure the free space of the
plugged external USB hard drive/USB flash disk is more than 4MB.
Plug the provided Power Adapter into the Power jack on the back of the
Modem Router and the other end to a standard electrical wall socket.
Switch on the ON/OFF button and power on all your other network devices.
Then check to see if the LEDs of the Modem Router display normally as the
diagram below describes.
Power: Solid
light
ADSL: Solid
light or flashing
If the LEDs display abnormally, please check to see if all the cable
Note
connectors (power adapter, phone line Ethernet cable and USB device)
are well connected to your device. With the phone line well connected, if
the ADSL LED turns off after flashing, please contact your ISP to ensure
that your Internet connection is active.
WLAN: Solid
light or flashing
LAN: Solid light
or flashing
2
USB: Solid
light or flashing
Advertisement
