Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TP-Link TD-8610
Summary of Contents for TP-Link TD-8610
- Page 1 TD-8610 ADSL2+ Modem Rev: 1.0.4 1910010250...
- Page 2 Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.
-
Page 3: Fcc Statement
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 4: Table Of Contents
CONTENTS Package Contents ....................1 Chapter 1. Introduction ..................2 Product Overview ...................... 2 Main features ......................2 Supporting protocols ....................2 Transmit data-rate ..................... 3 ATM property ......................3 System support ......................3 Working environment ....................3 Conventions ......................3 Chapter 2. -
Page 5: Package Contents
ADSL2+ MODEM Package Contents The following items should be found in your package: One TD-8610 External ADSL2+ MODEM One AC power Adapter for TD-8610 External ADSL2+ MODEM One RJ45 cable Two RJ11 cables One ADSL splitter One Resource CD for TD-8610 External ADSL2+ MODEM, including: •... -
Page 6: Chapter 1. Introduction
TD-8610 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices, supporting Auto-MDIX. TD-8610 not only uses html (web mode through Ethernet port) to configure the MODEM but also use external utility software too. You can download it from our website (http://www.tp-link.com). -
Page 7: Transmit Data-Rate
Storage temperature: -40 ~70 Humidity: 10%～90% 1.8 Conventions The Modem or TD-8610 mentioned in this User Guide stands for TD-8610 External ADSL2+ Modem without any explanations. Parameters provided in the pictures are just references for setting up the product, which may... -
Page 8: Chapter 2. Hardware Installation Guide
TD-8610 ADSL2+ MODEM Chapter 2. Hardware Installation Guide 2.1 System requirement Confirm your computer has been installed with networking interface card (NIC) before connecting ADSL MODEM to your computer, with operating system supporting the TCP/IP protocol. 2.2 LED explanation The panel of ADSL MODEM includes one power button, one power indicator and four function... -
Page 9: Hardware Installation Procedures
ON/OFF: Turn on/off the ADSL modem’s power. 2.4 Hardware installation procedures First Step: Connect the MODEM of Splitter with the LINE port of the TD-8610 ADSL2+ MODEM by telephone line. While you need to use a telephone, please attach telephone line into the phone of Splitter. -
Page 10: Chapter 3. How To Use
TD-8610 ADSL2+ MODEM Chapter 3. How to use 3.1 Computer Configuration Configure TCP/IP component On the Windows taskbar, click the Start button, and then click Control Panel. Click the Network and Internet Connections icon, and then click on the Network Connections tab in the appearing window. - Page 11 TD-8610 ADSL2+ MODEM Figure 3-2 The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Select Use the following IP address. And the following items will be available. If the Moedm's IP address is 192.168.1.1, specify IP address as 192.168.1.x (x is from 2 to...
- Page 12 TD-8610 ADSL2+ MODEM Figure 3-3 Now: Click OK to save your settings Note: Users of Windows 98 can open TCP/IP Properties according to the following: Right-click (Mouse) Network Neighbor Choose Properties Double-click TCP/IP. Users of Windows 2000/NT/XP can do the following: Right-click Network Neighbor...
-
Page 13: Login
TD-8610 ADSL2+ MODEM Figure 3-4 If the screen looks like the following, the connection has failed. Please try again. Figure 3-5 3.2 Login Startup Internet Explorer, and enter 192.168.1.1; then enter user name (admin), password (admin), you will see the page (Figure 3-6). When ADSL connection is OK, you will see some information such as link rate. -
Page 14: Setup
TD-8610 ADSL2+ MODEM The default user name and its password is admin; if you want to change it, please go to "Management→Password". (Figure 3-7) Figure 3-7 3.3 Setup Choose ATM PVCs Configuration (see Figure 3-8). Enter the VPI/VCI value which is provided by your ISP. Click Save to finish the... -
Page 15: Software Dial
Figure 3-8 3.4 Software Dial TD-8610 works in bridged (RFC 1483 Bridged) mode to connect to the Internet. You need to install dial software on your PC. There is some software working on WINDOWS in market, example for EnterNet3000, RASPPPoE and WinPeET. - Page 16 TD-8610 ADSL2+ MODEM When you want to access the Internet by ADSL, double-click this shortcut of dial connection on your desktop. Enter the account name and password, and click Connect to connect the Internet. How do I set up the connection in the Windows Vista? Users of Windows Vista can do as follows: Right-press Network Choose Properties, then you can see Figure 3-9.
- Page 17 TD-8610 ADSL2+ MODEM Figure 3-10 Type the Dial-up phone number, the User name and password supplied by your ISP in the new page. If you have forgotten an existing user name or password, please consult your ISP. Click Create to create the dial-up connection.
-
Page 18: Appendix A: Default Configuration
TD-8610 ADSL2+ MODEM Appendix A: Default Configuration USER NAME admin PASSWORD admin IP ADDRESS 192.168.1.1 VPI/VCI 0/33, 0/35, 8/35, 8/48...