Adjust Altitude; Reset Defaults; Non-Dell Toner - Dell 2130cn User Manual

Auto Registration Adjustment
Auto Correct
Color Regi Chart
Color Registration Adjustment
1 (Lateral)
Color Registration Adjustment
2 (Process)
Apply New Settings
Restart printer to apply new settings

Adjust Altitude

Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the
location where the printer is being used.
Values:
0 meter*
1000 meters
2000 meters
3000 meters
Apply New Settings
Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes.

Reset Defaults

Purpose:
To initialize the NV (nonvolatile) memory for system parameters. After executing this function to automatically restart the printer, the menu parameters, or
data are reset to their default values.
Values:
Start Initializes system parameters.

Non-Dell Toner

When Non-Dell toner cartridge is used, the printer may be severely damaged and may not be covered by your warranty.
Purpose:
To specify whether or not to use another manufacturer's toner cartridge.
Values:
Non-Dell Toner
Downloaded from ManualsPrinter.com Manuals
Off Does not perform color registration automatically.
On* Performs color registration automatically.
Click Start to perform color registration automatically.
Click Start to print a color registration chart.
-9-
+9
Yellow
0*
-9-
Specifies lateral (perpendicular to paper feed direction) color adjustment values that are found in the color
+9
Magenta
registration chart individually for Yellow, Magenta, and Cyan.
0*
-9-
+9
Cyan
0*
-9-
+9
Yellow
0*
-9-
Specifies process (paper feed direction) color adjustment values that are found in the color registration
+9
Magenta
chart individually for Yellow, Magenta, and Cyan.
0*
-9-
+9
Cyan
0*
After you complete the settings, press the Apply New Settings button to apply the changes.
Press the Restart printer to apply new settings button to apply the changes.
Specifies the altitude of the location where the printer is installed.
After you complete the settings, press the Apply New Settings button to apply the changes.
Off* Disables the use of another manufacturer's toner cartridge.
On Enables the use of another manufacturer's toner cartridge.