VDO MS 4300 Owner’s Owner's Manual page 49

48
C-IQ
Activating/ deactivating the display of the start/ expiration of C-IQ products.
Settings:
Starting soon: Number of days (1 ... 10) in advance that you want to be informed of
your activated products.
Expiring soon: Number of days (1 ... 10) in advance that you want to be informed of
the expiration of your activated products.
Using "OUT" you deactivate notification of the start/ expiration of C-IQ products.
Notification is only given once per day.
Speed corr.
Setting the correction factor for the average speed which the navigation system uses
as the basis for estimating the time of arrival. You can adapt the average speed if re-
quired (e.g. if the estimated time of arrival differs greatly from the actual time).
Settings:
50 ... 150: Correcting the average travel speed in percent.
We do not recommend you deviate significantly from the standard value of 100%.
Ferries*
Allowing/ excluding ferries from the route planning.
Settings:
ON: The navigation system uses ferries for route planning.
OFF: The navigation system uses as few ferries as possible for route planning.
Tollroads*
Allowing/ excluding toll roads from the route planning.
Settings:
ON: The navigation system uses toll roads for route planning.
OFF: The navigation system uses as few toll roads as possible for route planning.
Tunnels*
Allowing/ excluding tunnels from the route planning.
Settings:
ON: The navigation system uses tunnels for route planning.
OFF: The navigation system uses as few tunnels as possible for route planning.
TMC events
Activating/ deactivating the display of traffic information on the guidance screen.
Settings:
ON: Road obstructions on the route (TMC traffic information) are displayed on the
guidance screen.
OFF: No traffic information display.
* Availability of these functions depends on the map data used. If route planning is
not possible without the selected exceptions, ferries, tunnels and toll roads are in-
cluded in route planning.
Setup