VDO MS 4300 Owner’s Owner's Manual page 46

Compass
Activating/ deactivating the compass display on the screen.
Settings:
ON: Displaying the compass needle (north) in the bottom left hand corner of the
screen.
OFF: Compass is not displayed.
AF retuning
Setting the RDS AF function.
Settings:
ON: Automatic retuning to alternative frequencies for the same station.
OFF: No automatic retuning to alternative frequencies. The radio keeps to the recei-
ving frequency set.
In conjunction with the regional function the radio can switch to a different regio-
nal programme from the same station for a certain period of time. In this case acti-
vate the corresponding regional function option (see "Regional").
SDVC
Adjustment for speed-dependent volume control.
Settings:
1 ... 5: Small (1) to large (5) increase in volume on acceleration.
OFF: No speed-dependent volume control.
Max.start vol.
Setting the maximum volume when the unit is switched on.
Settings: 5 ... 40
When you switch on the unit, the volume will always be set to this level if the vo-
lume was louder than this level when you switched off.
Search level
Setting the search level for the radio.
Settings:
LO: Only stations with a high field strength will be found during the search.
DX: Stations with a low field strength will also be found during the search.
Tuner grid
Setting the tuner grid for the radio.
Settings:
EUROPE: Frequency range FM 87.5 - 108 MHz; MW 531 - 1629 kHz
Tuning steps for automatic search: FM: 100 kHz; MW: 9 kHz;
Tuning steps for manual search: FM: 50 kHz; MW: 1 kHz.
USA: Frequency range FM 87.9 -107.9 MHz; MW 530 -1710 kHz
Tuning steps for automatic search: FM: 200 kHz; MW: 10 kHz;
Tuning steps for manual search: FM: 100 kHz; MW: 1 kHz.
Please note: All the stored stations will be deleted if the tuning grid is changed.
Setup
45