VDO MS 4300 Owner’s Owner's Manual page 40

Viewing details relating to traffic information
Select the required traffic report from one of the three lists "On route", "Nearby"
or "At destination" in order to view details relating to traffic information.
The following information is available:
Distance to the start of the segment
in which the traffic obstruction is lo-
cated;
Length of the section in which the
traffic obstruction is located;
Type of obstruction (e.g. road works,
stationary traffic, closed road).
Road affected
Information on the hold-up transmitted by the TMC provider.
TMC provider
If there are traffic obstructions on the route, the navigation system will also show
you the estimated delay that they are likely to cause.
How TMC traffic announcements are made
If TMC messages are available for your planned route, they will also be announced as
voice messages.
Repeat announcement
Press the RPT button.
You will hear the current destination guidance message and the most recent TMC
message.
Pay TMC products
In some countries or regions extended TMC information might be available for an ad-
ditional charge. These pay TMC services are supported by your navigation system and
can be activated via the C-IQ Service Centre. See "C-IQ – Intelligent Content On De-
mand" section.
Pay TMC stations are only displayed in the TMC station list if you have activated the
corresponding C-IQ product.
Receivable pay TMC stations are marked with a £, and those you have activated are
marked with a R.
Navigation
39