Connecting The Peripheral Device Cables And Power Cord - HP DL360 - ProLiant - G3 Setup And Installation Manual

Server Installation
3. Attach the rail cable strap (1) and tighten the thumbscrew (2).
Figure 3-6: Attaching the rail cable strap (cable tray and
server removed for clarity)
Connecting the Peripheral Device Cables and
Power Cord
WARNING: To reduce the risk of electrical shock or fire, do not plug
telecommunications/telephone connectors into the Network Interface
Controller (NIC) connectors.
Use the following figure and table to identify connectors. Connect the power
cord last.
3-8 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide