Table of Contents
Advertisement
2.
Holding the handle of the power supply with one hand and supporting the bottom of the power
supply with another hand, push the power supply into the slot along the guide rails until the power
supply is completely inserted.
3.
Use a Phillips screwdriver to fasten the screws on the power supply.
Figure 23 Installing an AC power supply
Figure 24 Installing a DC power supply
Connecting the AC power cord
CAUTION:
Before powering on the device, connect the grounding cable of the device.
To connect the AC power cord:
1.
Connect one end of the AC power cord to the AC-input power receptacle on the device.
2.
Use a cable tie to secure the AC power cord to the handle of the AC power supply.
3.
Connect the other end of the AC power cord to the AC power source.
15
Advertisement
Table of Contents
