Table 5-4
Class: HPVC_SAStorageExtent
Property name
CreationClassName
DeviceID
SystemCreationClassName
SystemName
BlockSize
NumberOfBlocks
Primordial
HPVC_SAStorageVolume
5-2-5
HPVC_SAStorageExtent represents logical volumes configured on Smart Array controller. There will
be one instance per logical volume.
Table 5-5
Class: HPVC_SAStorageVolume
Property name
ElementName
Property implementation
CIM_EnabledLogicalElement
CIM_LogicalDevice
HPVC_SAStorageExtent
HPVC_SAStorageExtent-<model>-<serial number>
For example, HPVC_SAStorageExtent-
HPDG072BB975-3NP2TCCF000098402P95
SMX_ComputerSystem
Server host name
CIM_StorageExtent
Block size in bytes
Total number of blocks on disk drive
Set to True
VMware_StorageExtent
HPVC_SAStorageExtent
Property implementation
CIM_ManagedElement
Logical Volume Y on HPSA X : RAID level : Capacity :
Associated Physical Disks : Detailed Status
Associated Physical Disks reports a list of physical disks
that are associated with this logical volume. Physical
disk's index should match the one reported in
HPVC_StorageExtentElement Name.
Detailed Status shows detailed volume status
information when this logical volume is degraded or
failed. When logical volume is in an OK condition, this
field should be an empty string.
For example, Logical Volume 1 on HPSA 1 : RAID 0 :
68GB : Disk 1, 3, 4 : Interim Recovery
CIM_ManagedSystemElement
Smart Array View Class 155