Removing The 1 Ghz Processor; Removing The Fan Heatsink - Intel S815EBM1 - Server Board Motherboard Product Manual

Removing the 1 GHz Processor

To remove the 1 GHz processor, follow these instructions:
1. Observe the safety and ESD precautions at the beginning of this chapter.
2. Disconnect the processor fan cable.
3. Remove the fan from the fan heatsink.
4. Slowly pull up the handle of the plastic clip (reversing the action shown in Figure 13, A).
5. Disengage the fan heatsink clip by pushing your index finger against the back of the clip as
you pull up on the clip extension with your thumb (see Figure 16).
6. Remove the fan heatsink.
7. Raise the processor socket handle completely.
8. Remove the processor.
30
Figure 16. Removing the Fan Heatsink
OM11069
Intel Server Board S815EBM1 Product Guide