Description; Server Board Features - Intel S815EBM1 - Server Board Motherboard Product Manual

1 Description

Server Board Features

Table 1.

Server Board Features

Feature
Processors
Memory
Chipset
I/O Control
Peripheral Interfaces
SCSI LED Connector
Expansion Capabilities
BIOS
Power Management
†
Wake on LAN
Technology
Form Factor
Description
®
Support for either an Intel
(FC-PGA and FC-PGA2) package or an Intel
package.
• Three 168-pin Dual Inline Memory Module (DIMM) sockets
• Support for up to 512 MB system memory
• Support for single row or double row DIMMs
The S815EBM1 board includes the Intel
• Intel
®
82815 Graphics and Memory Controller Hub (GMCH)
• Intel
®
82801BA I/O Controller Hub (ICH2)
• 4 Mbit Firmware Hub (FWH) (STM M50FW040 or equivalent)
SMSC LPC47M132 LPC bus I/O controller.
• One back panel serial port; one onboard serial port header
• USB ports: four back panel
• One parallel port
• Two IDE interfaces with Ultra ATA/66 and ATA/100 support
• One floppy drive interface
• PS/2
†
keyboard and mouse ports
Allows add-in SCSI controllers to use the same LED as the onboard I/O
controller.
Three PCI bus expansion slots (SMBus routed to PCI slot 2, S5 wake from all
PCI slots).
Intel/AMI BIOS.
4 Mbit Firmware Hub (FWH).
Support for:
• Advanced Power Management (APM)
• Advanced Configuration and Power Interface (ACPI)
• Plug and Play
• SMBIOS
Support for both ACPI Rev. 2.0 and APM Rev. 1.2.
Support for system wake up using an add-in network interface card with remote
wake up capability.
MicroATX (9.6 inches by 8.2 inches).
®
Pentium III processor in a Flip Chip Pin Grid Array
®
Celeron
®
815E Chipset, consisting of:
processor in a FC-PGA
™
7