Performing Faxing And Related Tasks - Lexmark X5450 User Manual

Performing faxing and related tasks

Sending a fax
Entering a fax number
1
From the control panel, press Fax Mode.
2
Enter a fax number using:
The text box
Speed Dial or Group Dial
3
If you want to send a fax to a group of numbers (broadcast fax):
a
Press .
b
Repeat step 2, using any combination of the previous methods, until a maximum of 30 fax numbers have been
entered.
Related topics:
•
"Using the control panel" on page 90
Sending a fax using the control panel
1
Make sure the printer is on.
2
Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
Enter a fax number using the keypad.
Notes:
•
You can include a calling card number as part of the fax number.
•
Enter a maximum of 64 digits in a fax number.
•
Press Pause / Redial to insert a three-second pause in a number you
are entering to wait for an outside line or get through an automated
answering system.
a
Press Phone Book.
b
Enter Speed Dial and/or Group Dial numbers.
•
Press or repeatedly until the Speed Dial or Group Dial number
you want appears.
•
Use the keypad to enter the number of the Speed Dial entry (1–89)
or Group Dial entry (90–99).
Notes:
•
For instructions on how to add Speed Dial or Group Dial numbers
using the computer, see "Setting up Speed Dial using the
computer" on page 60.
•
For instructions on how to add Speed Dial or Group Dial numbers
using the control panel, see "Using the Phone Book" on
page 60.
Faxing
55