Lexmark X5450 User Manual page 40

From here
Adjustments tab
Preview area
These buttons are at the bottom of the Preview area:
Click
Related topics:
•
"Using the All-In-One Center" on page 105
Editing the Customize list
The list of applications in the Customize list is generated when you install the All-In-One software. You can expand
this list to a maximum of 50 applications. You can add, remove, or modify an application in the Customize list.
1
From the Finder desktop, double-click the Lexmark 5400 Series folder.
2
Double-click the Lexmark 5400 Series Center icon.
Go to
Brightness
Contrast
Gamma
Blur/Sharpen
Rotate Image
Invert Colors
Mirror
Defaults
Auto-crop sensitivity
Weight, height, and file size
display
To
Go to the Help Center for more information.
Show or hide the Scan Setup drawer.
Exit the current dialog without saving any changes.
Refresh the image in the Preview area.
Start scanning.
To
Adjust the lightness and darkness of the scanned image.
Adjust the tone of the image as it is set off against a light or
dark background.
Increase or decrease the color correction curve. Enabling
gamma lets you adjust the amount of ink on the page.
Adjust the level of sharpness of the scanned image.
Rotates the image 90 degrees clockwise per click.
Reverse the colors of the image by inverting the RGB data.
The effect created is similar to that of a film negative.
Produce a mirror image of the document or image.
Reset the Adjustment controls to the factory default settings.
See a preview of the image. Some settings in the dialog are
interactive, so you can readily view the changes on the image
as you adjust the settings. Clicking
document and shows the recent changes in the Preview
area.
Select or clear Auto-crop sensitivity to activate or deactivate
auto-cropping. Adjust the slider to adjust auto-cropping.
See the dimension of the scanned image. Select your
preferred unit of measurement from the pop-up menu.
Scanning
40
re-scans the original