Lexmark X5450 User Manual page 143

No photo/paper size
selection has been
made.
No photo files found No supported images have been found on the memory card or flash drive you
No proof sheet
information.
Phone Line Busy
(change redial settings)
Phone Line Busy
(schedule to resend fax at a
later time)
You have not selected any of the options on step 2 of the photo proof sheet you
printed and scanned.
1
Make sure you completely fill in your selected circle or circles.
2
Press to continue.
inserted.
The printer will read photos created using the JPEG format. For more information,
see the documentation that came with the digital camera.
The photo proof sheet you printed and scanned is no longer valid.
You may have removed the memory card or flash drive from the printer, or turned
off the printer, before scanning the photo proof sheet.
For more information, see "Printing photos stored on a memory device using the
proof sheet" on page 73.
The printer automatically redials three times at 3-minute intervals. You can change
the default settings to redial up to five times at intervals up to 8 minutes.
To change the redial settings:
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Fax Setup appears.
4
Press .
5
Press or repeatedly until Dialing and Sending appears.
6
Press .
7
Press .
8
To change the number of times the printer will redial:
a
Press or repeatedly until Redial Attempts appears.
b
Press .
c
Press or repeatedly until the setting you want appears.
d
Press .
9
To change the length of time between redials:
a
Press or repeatedly until Redial Time appears.
b
Press .
c
Press or repeatedly until the setting you want appears.
d
Press .
See "Sending a broadcast fax at a scheduled time" on page 56.
Troubleshooting
143