Cr_Idslot1 Command; Cr_Idslot2 Command; Cr_Idslot3 Command; Cr_Idslot4 Command - Sanyo PLC-WM5500/L - 5500 Lumens Manual

PLC-WM5500/WM5500L Expand Serial Command Functional Specifications

9.7.15 CR_IDSLOT1 Command

Command "CR_IDSLOT1" [CR]
Get ID information of Input1. This command is to determine sources possible to
Details
input.
Acceptable
Response
Unacceptable

9.7.16 CR_IDSLOT2 Command

Command "CR_IDSLOT2" [CR]
Get ID information of Input2. This command is to determine sources possible to
Details
input.
Acceptable
Response
Unacceptable

9.7.17 CR_IDSLOT3 Command

Command "CR_IDSLOT3" [CR]
Get ID information of Input3. This command is to determine sources possible
Details
to input.
Acceptable
Response
Unacceptable

9.7.18 CR_IDSLOT4 Command

Command "CR_IDSLOT4" [CR]
Get ID information of Input4. This command is to determine sources possible
Details
to input.
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"30" --------------- On-board (HDMI and D-Sub)
%1
Available source: ANALOG, SCART, HDMI
"Error Code" [CR]
"000_%1" [CR]
"41" --------------- On-board (5BNC)
%1
Available source: ANALOG, VIDEO, YPBPR
"Error Code" [CR]
"000_%1" [CR]
"51" --------------- On-board (3BNC and S-VIDEO)
%1
Available source: VIDEO, S-VIDEO, YPBPR
"Error Code" [CR]
"000_%1" [CR]
"13" --------------- PJ-Net (Viewer capable)
Available source: Network
*With PJ-Net unattached, this command is invalid and error
code "103" is returned.
*With PJ-Net attached and the power OFF, error code "101" is
returned.
*In models not supporting PJ-Net, error code "103" is returned.
"Error Code" [CR]
69/88