This dialog box lets you change the P-VOL Fence Level for an existing pair. See
level" (page 51)
Item
Volume
P-VOL Fence Level
Display Filter dialog box
This dialog box lets you filter the information displayed on the Pair Operation window.
Filters are determined by the tree selection.
When Subsystem or LDKC is selected, all settings are available.
When a CU grouping or a CU is selected, GID and Port are disabled with All displayed. They
cannot be changed.
When a CU is selected, the CU setting is not available.
When a port is selected, the port setting is not available.
When GID is selected, the group and port settings are not available.
Item
Port
GID
CU
Type
for complete information.
Description
Shows the selected volume's port, GID, LUN (LDKC number, CU number, LDEV number).
Where the option is defined for rejecting write operations to the P-VOL.
Description
Select the port.
Select the GID (host group identification number).
Select the CU.
Select the pair type: synchronous, synchronous-C, ESAM, or all types.
"Change fence
Display Filter dialog box
93