HP StorageWorks P9000 User Manual page 78

Table 27 RAID Manager error codes for Continuous Access Synchronous (SSB1 is
B901/B90A/B90B/B912/D004) (continued)
Error code Description
(SSB2)
C3BE These volumes cannot be specified as a Continuous Access Synchronous S-VOL:
Business Copy S-VOL not in PSUS status
Business Copy Reserved volume
Business Copy P-VOL in the process of reverse copy
C3BF A Continuous Access Synchronous S-VOL cannot be specified as a Business Copy S-VOL, Business Copy
Reserved volume, or a Business Copy P-VOL in the process of reverse copy.
C3C7 A request for a Paircreate operation was received. The command was rejected because the specified volume
was already part of a Continuous Access Synchronous or Continuous Access Journal pair (including journal
volumes).
C3CA The S-VOL is reserved. Or a secondary system, S-VOL, or the path between primary system and secondary
system is in the BUSY status.
C3CD The Continuous Access Synchronous S-VOL is a Business Copy volume.
C3D2 The DKC type of the secondary system is not supported by Continuous Access Synchronous.
C3D3 The SSID or CU number of the specified secondary system is invalid.
C3D6 The specified S-VOL is unavailable because the connecting port cannot recognize it.
C3D7 The pair status of the S-VOL is invalid.
C3D9 The pair cannot be created if the Continuous Access Synchronous S-VOL corresponds to any of the following:
The volume is a V-VOL; the pair using the volume is a Business Copy or Snapshot pair, or an Auto LUN
reserve volume.
The volume is a V-VOL and an addition to volume capacity is in progress, or pages are being released.
The capacity of the volume is different from the capacity of the P-VOL
The volume is initialized by Business Copy
C3DB S-VOL pair status is not PSUS or PSUE.
CB12 Continuous Access Synchronous Z, Continuous Access Synchronous, and Continuous Access Journal cannot
be mixed in the consistency group.
CB19 The secondary system consistency group cannot be deleted because the Takeover command reversing
operations between the P-VOL and S-VOL failed.
CB1A The secondary system consistency group was abnormally terminated because the Takeover command
reversing operations between the P-VOL and S-VOL failed.
CB1D No dummy volume can be created in the S-VOL.
CB1F The secondary system does not support Continuous Access Synchronous.
CB20 In referring to the function bit, the system information reference was abnormally terminated.
CB21 In a Pairresync operation, all difference setting was abnormally terminated.
CB5E When connected to the old model, LUSE pairs with different amounts of capacity cannot be created.
CB5F If the path is set between CUs LUSE pairs with different CUs cannot be created.
CB60 Continuous Access Synchronous is not installed in the secondary system.
CB62 One DKC cannot include a pair using Escon and a pair using Fibre.
CB6E The Paircreate operation cannot be executed because the P-VOL is an external storage system volume.
CB6F The Paircreate operation cannot be executed because the S-VOL is an external storage system volume.
78 Troubleshooting