If you were to use the given defaults, the resulting names would look like those in
that the volume name carries into all the snapshot elements, including SmartClone volumes, which
are created from a snapshot.
Table 3 Example of how default names work
Element
SmartClone Volumes
Snapshots
Remote Snapshots
Schedules to Snapshot a Volume
Schedules to Remote Snapshot a
Volume
This example is illustrated in
Figure 3 Using the default naming for all the elements
.
32
Getting started
Default name
VOL_
_SS_
_RS_
_Sch_SS_
_Sch_RS_
Figure 3
on page 32.
Table
Example
VOL_VOL_ExchLogs_SS_3_1
VOL_ExchLogs_SS_1
VOL_RemoteBackup_RS_1
VOL_ExchLogs_Sch_SS_2.1
VOL_ExchLogs_Sch_RS_2_Pri.1, VOL_Remote-
Backup_Sch_RS_1_Rmt.1
3. Notice