To Edit The Smartclone Volumes; Deleting Smartclone Volumes - HP StorageWorks P4000 User Manual

Item
Cluster
Data protection Level
Type
Provisioning

To edit the SmartClone volumes

1. In the navigation window, select the SmartClone volume for which you want to make changes.
2. Click Volume Tasks, and select Edit Volume.
The Edit Volume window opens. See
changes to the SmartClone volume characteristics.
3. Make the desired changes to the volume, and click OK.
If you change a SmartClone volume characteristic that will change other related volumes and
snapshots, a warning opens that lists the volumes that will be affected by the change. If there are
too many volumes to list, a subset will be listed with a note indicating how many additional
volumes will be affected.

Deleting SmartClone volumes

Any volumes or snapshots that are part of a SmartClone network can be deleted just like any other
volumes or snapshots. The only exception is the clone point, which cannot be deleted until it is no
longer a clone point.
252 SmartClone volumes
Shared or Individual
Shared
Shared
Individual
Individual
Table 56 on page 251 for detailed information about making
Requirements for Changing
All related volumes and snapshots
will move automatically to the target
cluster. The target cluster must
• Reside in the same management
group.
• Have sufficient storage systems
and unallocated space for the
size and data protection level of
the volume and all the other re-
lated volumes and snapshots be-
ing moved.
When moving volumes to a different
cluster, those volumes temporarily
exist on both clusters.
All related volumes and snapshots
must change to the same data protec-
tion level. The cluster must have suffi-
cient storage systems and unallocated
space to support the new data protec-
tion level for all related volumes.
Determines whether the volume is
primary or remote.
Determines whether the volume is
fully provisioned or thinly provi-
sioned.