Deleting The Clone Point; Deleting Multiple Smartclone Volumes; Viewing Volumes That Depend On A Clone Point - HP StorageWorks P4000 User Manual

CAUTION:
Before deleting any volumes or snapshots, you must first stop any applications that are accessing the
volumes and log off any iSCSI sessions that are connected to the volumes.

Deleting the clone point

You can delete a clone point if you delete all but one volume that depends on that clone point. After
you delete all but one volume that depends on a clone point, the clone point returns to being a standard
snapshot and can be managed just like any other snapshot.
For example, in
you can delete the clone point.
Figure 96 Viewing volumes that depend on a clone point
.

Deleting multiple SmartClone volumes

Delete multiple SmartClone volumes in a single operation from the Volume and Snapshots node of
the cluster. First you must stop any application servers that are using the volumes, and log off any
iSCSI sessions.
Figure 96 on page 253, you must delete any four of the five C#class_x volumes before
P4000 SAN Solution user guide 253