Deleting Schedules To Snapshot A Volume; Scripting Snapshots; Delete Multiple Snapshots From The Volumes And Snapshots Node - HP StorageWorks P4000 User Manual

2. Click the Schedules tab to bring it to the front.
3. Select the schedule you want.
4. Click Schedule Tasks on the Details tab, and select Resume Snapshot Schedule.
5. In the Confirm window, click OK.
In the Next Occurrence column of the tab window, this snapshot schedule shows the date and
time the next snapshot will be created.

Deleting schedules to snapshot a volume

NOTE:
After you delete a snapshot schedule, if you want to delete snapshots created by that schedule, you
must do so manually.
1. In the navigation window, select the volume for which you want to delete the snapshot schedule.
2. Click the Schedules tab to bring it to the front.
3. Select the schedule you want to delete.
4. Click Schedule Tasks on the Details tab, and select Delete Schedule.
5. To confirm the deletion, click OK.
The Schedules tab refreshes without the deleted snapshot schedule.
6. [Optional] To delete snapshots related to that schedule, select the Volumes and Snapshots node
where you can delete multiple snapshots from a list.
Figure 79 Delete multiple snapshots from the volumes and snapshots node
.

Scripting snapshots

Application-based scripting is available for taking snapshots. Using application-based scripts allows
automatic snapshots of a volume. For detailed information, see
User Manual, found in the Documentation directory under the CMC Program Files, for information
about the SAN/iQ command line interface.
226 Using snapshots
Chapter 15 on page 255 and the Cliq