Adding Users To An Existing Group; Removing Users From A Group; Deleting Administrative Groups - HP StorageWorks P4000 User Manual

2. Click Administration Tasks in the tab window, and select Edit Group.
Administrative groups can have:
• Different levels of access to the storage system, such as read/write
• Access to different management capabilities for the storage system, such as creating volumes
When you create a group, you also set the management capabilities available to members
of a group. The default setting for a new group is Read Only for each category.
3. Click the permission level for each function for the group you are creating.
See Table 29
4. Click OK to finish.

Adding users to an existing group

1. Log in to the management group, and select the Administration node.
2. Click Administration Tasks in the tab window, and select Edit Group.
3. Click Add in the Users section.
The Add Users window opens with a list of administrative users.
4. Select one or more users to add to the group.
5. Click Add.
6. Click OK to finish creating a new group.

Removing users from a group

1. Log in to the management group, and select the Administration node.
2. Click Administration Tasks in the tab window, and select Edit Group.
3. Select one or more users to remove from the group.
4. Click Remove.
5. Click OK to finish.

Deleting administrative groups

Delete all users from a group before you delete the group.
1. Log in to the management group, and select the Administration node.
2. Click Administration Tasks in the tab window, and select Delete Group.
A confirmation window opens.
3. Click OK.
4. Click OK to finish.
on page 118 for a description of the permission levels.
P4000 SAN Solution user guide 119